DP301AN-AC5-C3C交流電流表 美國omega
3-1/2 Digit AC Power Line Monitor, 1/8 DIN
DP301AN-AC
1年保修 CE
3-1/2 Digit AC Power Line Monitor, 1/8 DIN
DP301AN-AC:3-1/2 Digit AC Power Line Monitor, 1/8 DIN
DP301AN-AC5
1,999 Count Display Span
50.0 to 199.9 Vac Range (100 mV Resolution)
50 to 650 Vac Range (1V Resolution)
Bright, 14 mm (0.56") LED Display
Automatic Zero
Display Hold and Test
Screw-Terminal Barrier Strip
Short 104 mm (4.1") DeeP 1/8 DIN Case
Options
Isolated 9 to 32 Vdc Power
Isolated 26 to 56 Vdc Power
NEMA 4 (IP65) Splash Proof Lens Cover
NEMA 4 (IP65) Splash Proof Lens Case
The DP301AN-AC is a low-cost, compact 3-1/2 digit panel meter for AC power line monitoring. It uses a half-wave rectifier calibrated to read the RMS value of sinusoidal signals.
Two input ranges are jumper-selectable: 50.0 to 199.9 Vac with 100 mV resolution and accuracy optimized for 115 Vac, and 50 to 650V with 1V resolution and accuracy optimized for 230 Vac. The meter fits a standard 1/8 DIN panel cutout 92 x 45 mm (3.62 x 1.77") and requires a depth of less than 104 mm (4.1") behind the panel. A screw-terminal barrier strip for signal and power is standard.
Mechanical options include a board-edge connector display TEST, display HOLD, +4.7V and -4.7V outputs splash-proof lens cover which meets NEMA 4 (IP65) requirement is available for industrial environments. Power options isolated 9 to 32 Vdc and 26 to 56 Vdc.
SPECIFICATIONS
Noise Rejection (AC GND to SIG GND)
CMR: 120 dB, DC to 60 Hz
CMV: 1500 Vp per HV test, 354 Vp per IEC spacing
Accuracy at 25°C (10 to 100% of Full-Scale Range)
Maximum Error (Reading–Actual):
50.0 to 199.9 V range: ±0.006 (R-115 V)
±0.1 V and 50 to 650 V range: ±0.006 (R-230 V) ±1 V
Span Tempco: ±0.01% of reading/°C
Step Response: 1 s
Warmup to Rated Accuracy: 10 min
Signal Input
Configuration: Half-wave average, RMS-calibrated
Zero: Automatic
Frequency: 49 to 440 Hz
Display
Type: 7-segment, red LED
Height: 14.2 mm (0.56")
Symbols: 1.8.8.8
Decimal Points: Three positions programmable internally or at connector, 10 mA average sink
Overrange Indication: Three least-significant digits blank
Power
AC Voltages: 115 or 230 Vac ±15%
AC Frequency: 49 to 440 Hz
DC Voltages: 9 to 32 Vdc, isolated to 300 Vp; 26 to 56 Vdc, isolated to 300 Vp
Power Consumption: 2.4 W (nominal)
Output Voltages: 4.7 Vdc and -4.6 Vdc ±5%, 10 mA max
Environmental
Operating Temperature: 0 to 60°C
Storage Temperature: -40 to 85°C
Relative Humidity: 95% at 40°C (non-condensing)
Analog-to-Digital Conversion
Technique: Dual-slope, average-value
Read Rate: 2.5/s
Integration Period: 100 ms
Digital Controls
HOLD and TEST Inputs: TTL or 5 V CMOS compatible
Mechanical
Bezel: 96 W x 48 H x 5.1 mm D (3.78 x 1.89 x 0.20")
Depth Behind Bezel: 104 mm (4.09")
Panel Cutout: 92 W x 45 mm H (3.62 x 1.77")
Weight: 14 oz (400 g)
Case Material: 94V-0 UL-rated polycarbonate
產品型號說明
(1) (2) (3) (4)
選項描述
(1) Model
選擇
DP301AN 代表 3-1/2 digit AC power line monitor
(2) Input Range
選擇
-AC5 代表 50 to 199.9 Vac (includes D4 connector)
-AC6 代表 50 to 650 Vac (includes D4 connector)
(3) Power options
選擇
Nothing(leave field blank) 代表 115 Vac 50/60 Hz power
-C1 代表 230 Vac 50/60 Hz
-C3C 代表 Isolated 9 to 32 Vdc
-C3E 代表 Isolated 26 to 56 Vdc
(4) Add-On Option
選擇
Nothing(leave field blank) 代表 red LED display
-G 代表 Green LED display
DP301AN-AC5-C3C交流電流表 美國omega
